翻转课堂融入线上教学的应用探索——以“Photoshop图像处理”课程为例

在新的教学环境下,开展翻转课堂教学面临着巨大的挑战。结合教学实践,分析实施翻转课堂教学存在的问题,在教学设计、教学形式和教学评价等方面提出相应的对策。大部分学生对翻转课堂内容及形式总体满意,但课程设计方面存在一些不足,需在教学实践中不断完善。     

Study of highly perturbed spacecraft formation dynamics via approximation

This paper explores methods for approximating and analyzing the dynamics of highly perturbed spacecraft formations with an emphasis on computationally efficient approaches. This facilitates on-board computation or rapid preliminary mission design analysis. Perturbed formation dynamics are often approximated as linear time-varying (LTV) systems, for which Floquet theory can be used to analyze the degree of system instability. Furthermore, the angular momentum of the relative orbital state can be computed with the approximate dynamics to provide additional insight. A general methodology is developed first and then applied to the problem of unstable formation dynamics in asteroid orbits. Here the dominant perturbative effects due to low-order gravitational harmonics and solar radiation pressure are modeled. Numerical simulations validate the approach and illustrate the approximation accuracy achieved.     

中国空间探测领域40年发展

中国空间科学学会成立的40年，是中国空间探测逐渐走进世界舞台的40年，空间探测极大推动了空间科学和相邻学科的发展，也影响到经济、军事和日常生活诸多方面.本文简要回顾了从空间探测专业委员会成立的1980年至今，中国空间探测领域的主要发展历程，包括探空火箭、高空气球、科学卫星、月球与行星探测、载人航天空间探测、遥感卫星地面站等主要项目、进展和所取得的成果，对未来若干年空间探测的发展进行了展望.      

面向安全属性的软件组件可信依赖关系度量模型

随着软件的应用规模越来越大，软件系统一旦出现故障，很可能会造成人员伤亡或财产等重大损失，因此对软件可信性进行评估尤为重要.在安全攸关如航空航天等领域，作为可信关键属性之一的安全性影响着整个软件系统的可信评估.特别当一个组件受到安全攻击或缺陷出现时，可信性会下降，会影响到与它可信关联的组件可信性，从而影响到整个系统的可信性.遵循这一思路，设计了软件系统组件可信性发生改变后对其它组件可信性影响度量公式，进一步给出当一组件可信性发生变化，整个软件系统各组件可信性度量发生变化的度量模型.本文以某“航天电源管理设备”为例，证明了本文所建立的组件可信依赖关系度量模型的合理性和有效性.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

一种小天体旋转参数估计方法

小天体旋转参数是科学数据，也是小天体测绘，着陆导航的基础数据.研究一种在小天体探测接近段过程中使用的基于图像上特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法.该方法首先建立小天体旋转关系模型，表示小天体在相机坐标系中的姿态变化；然后定义小天体旋转的状态方程，推到了扩展卡尔曼滤波器的计算过程.通过对观测图像序列上的特征点跟踪，利用扩展卡尔曼滤波器方法得到小天体旋转轴指向和自转角速度估计.实验中，在仿真相机与小天体相机100 km距离上，分析了相机坐标系小天体坐标系之间的四元数初值，图像上特征点跟踪精度，相机的观测指向等因素对小天体旋转参数估计精度的影响.实验结果表明，提出的基于图像特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法能够得到具有较高精度的估计结果.     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

弱引力下小行星动量驱动机器人的可控跳跃行为

以小行星表面着陆探测为背景,提出一种动量驱动机器人(MoRo)以满足弱引力复杂环境下的探测需求。该机器人利用弱引力环境下的摩擦和碰撞特性,通过主动辨识环境参数,规划和控制动量轮以产生期望的驱动力矩,完成可控性跳跃及腾空后的稳定拍照等任务。首先,基于MoRo的动量轮刹车机构特性,分析了MoRo在弱引力环境下的跳跃机理并对其跳跃方式进行了规划;接着考虑动量轮驱动机构三闭环伺服系统的非线性特性,基于Herze碰撞模型和Karnopp摩擦模型建立了MoRo在小行星表面的跳跃行为动力学模型;其次,使用机器学习算法建立环境参数和MoRo运动的函数关系,并基于环境参数规划动量轮转速实现跳跃距离和腾空高度的可控。最后,通过数值仿真校验了MoRo跳跃规划方法和控制方法的可行性。     

利用地月间空间站的载人登月飞行模式分析

为提高空间站利用率，降低载人登月任务成本，有效开发地月空间，研究了基于地月空间不同轨道空间站的载人登月飞行模式。首先对比直接往返登月飞行模式，对基于空间站的载人登月飞行模式进行任务分析，通过空间站将载人登月任务解耦为载人天地往返任务和登月任务两部分；其次通过轨道设计和稳定性分析提出考虑登月任务需求的地月间空间站可运行轨道和停泊点；最后建立一套飞行模式评价模型，从速度增量需求、飞行时间、空间环境、登月任务窗口、测控条件、交会对接技术难度、后续任务支持性和任务可靠性方面对6种不同位置空间站的登月飞行模式进行分析和定量评价。评价结果表明基于L2点Halo轨道空间站的载人登月飞行模式为更优飞行模式。